The KineMON 5U II Monitor from Kinefinity features a 5" LCD screen with a 1920 x 1080 resolution and brightness of 2000 cd/m². It supports input from the MAVO LF, TERRA 4K, or MEVO Edge 8K camera over a separately available proprietary cable that provides video and power to the monitor. It features a 1000:1 contrast ratio and supports 24-bit RGB colors and a 100% Rec.709 color gamut.

The monitor runs KineOS that allows you to view and adjust monitor settings. It features a fast boot-up time and low power consumption, and it provides a sharp picture with natural color. A 1/4"-20 mounting thread is provided on the bottom, top, and right sides to mount it onto the camera or rig using a variety of optional mounts. It is also compatible with the optional KineMON sun hood.

Connect your KineMON with a MAVO or TERRA camera to monitor your camera output with this Kine Monitor Cable from Kinefinity. The 12" long cable features 14-pin connectors on either end to connect to the ports on your KineMON video input and your camera video output, and it provides both video and power from the camera to the monitor. There is a right-angle connector on one end for a better fit. This 12" length is recommended when your KineMON is mounted directly onto the MAVO/TERRA.

Mount your KineMON-5U or KineMON-7H monitor directly onto your TERRA or MEVO camera with this Swivel Mount from Kinefinity. The durable aluminum and steel mount provides a 1/4"-20 thumbscrew with anti-twist pins to mount the monitor, and padding on the top prevents the monitor from twisting or scratching. The mount attaches to the camera body using two captive screws. The mount tilts for the best position and secures with tension adjustment.

Mount your KineMON-5U or KineMON-7H monitor onto a shoe mount for use with your TERRA or MEVO camera using this Cold Shoe Adapter Mount from Kinefinity. The aluminum and steel mount provides a 1/4"-20 thumbscrew with anti-twist pins on top to mount the monitor, and the mount attaches to any standard shoe mount using its shoe adapter on the base. The mount tilts for the best position and secures with tension adjustment.

Mount the KineEVF onto your KineMON 5U II or 7U with this KineEVF Wedge Block from Kinefinity. The aluminum wedge block mounts onto the side of the monitor using three included screws, and it provides a solid mount for the EVF bracket.

Protect your 5" KineMON-5U monitor from sunlight and glare with this Sun Hood from Kinefinity. The sun hood quickly attaches with elastic straps onto the KineMON-5U monitor. Four-sided coverage with black, weatherproof material provides optimal protection in extreme conditions, and it installs quickly and easily using elastic straps.

Add fast and ample media for high-resolution video capture with your MAVO Edge 8K/6K camera using the 1TB KineMAG Nano from Kinefinity. The KineMAG Nano is designed specifically for the MAVO Edge 8K, Edge 6K, or MAVO Mark2 camera slots, and it has a heat-dissipating plate on the body to keep the temperature cool.

Inside, an NVMe M.2 2280 SSD allows you to record up to 1TB of video, and it features read-only and RAID 5 write settings for the safety of your data. To offload your data, there is a high-speed USB-C 3.1 Gen 2 port that allows you to transfer data up to 10 Gb/s directly to your computer without the need for a separate reader.

Add fast and ample media for high-resolution video capture with your MAVO Edge 8K camera using the KineMAG Nano Body from Kinefinity. The KineMAG Nano body is designed specifically for the MAVO Edge 8K camera slot, and it has a heat-dissipating plate on the body to keep the temperature cool. This is an empty enclosure that accepts a separately available, third-party NVMe M.2 2280 SSD. To offload your data, there is a high-speed USB Type-C 3.1 Gen 2 port that allows you to transfer data up to 10 Gb/s directly to your computer.

This Short 10 Gb/s USB Type-C Data Cable from Kinefinity is designed for offloading data from your KineMAG Nano SSD card to a computer with a USB Type-C port. Adhering to USB 3.1 standards, it can transfer data at speeds of up to 10 Gb/s, so you'll spend less time waiting for your edit session to start. The short cable features USB Type-C ports on either end.

Power your MAVO LF, MAVO Edge 8K, or TERRA 4K camera with the compact, lightweight KineBAT 150 V-Mount Battery from Kinefinity. This 145Wh battery can support up to 8A draw at a nominal 14.8V. It provides two USB Type-C accessory ports for powering a camera, various accessories, or mobile devices. One of the USB Type-C ports can also be used to charge the battery using a PD fast charger such as the Kinefinity 65W PD Power Adapter. There is a 5-LED status gauge to indicate the remaining battery life.

Provide rapid charging for your batteries and battery chargers with this 65W PD Power Adapter from Kinefinity. The adapter features a standard AC wall plug and a USB Type-C output to provide 65W PD fast charge power to the separately available Kinefinity Hybrid Dual charger, so you can rapidly charge optional GripBAT batteries.

The adapter provides up to 3A current for a single battery and up to 2A per battery when charging multiple batteries with the separately available dual charger. It can also be used to provide PD fast charging for a professional V-mount battery or other USB Type-C devices.

Power your MAVO Edge 8K camera from a mains or battery source with this 100W Power Cord from Kinefinity. The braided cable features a 2-pin connector on one end to plug into the camera's power input. The other end features a USB Type-C connector to plug into the optional Kinefinity 65W PD Power Adapter, power bank, or cine battery with a USB Type-C output.

The GripBAT 2Si L-Series Battery from Kinefinity works with cameras, lights, and monitors that use Sony NP-F550/570 series batteries, and it comes in a striking red and white design. This battery pack features a capacity of 3500mAh, 26Wh and a 7.4V power output with a continuous 5A current.

The battery is well suited for powering L-series compatible light fixtures for extended lengths of time. Small and lightweight, lithium-ion batteries do not suffer from memory effects due to charging a partially discharged battery. The battery also features over/undervoltage, overcurrent, and over-temperature protection. It takes approximately 60 minutes to fully charge the battery using the separately available Kinefinity PD Hybrid Dual Charger.

Keep all your GripBAT batteries charged with the PD Hybrid Dual Charger from Kinefinity. The charger allows you to charge two GripBAT 2S L-series batteries, two GripBAT 4S BP-U30 batteries, or one of each simultaneously, even though they are different battery types.

The charger also allows you to charge the batteries using PD fast charge with the optional 65W PD power adapter. The charger is powered using a separately available USB Type-C charge cable or adapter that supports 60W and above PD charging, and the Kinefinity 65W PD Power Adapter is recommended.

Provide rapid charging for your batteries and battery chargers with this 65W PD Power Adapter from Kinefinity. The adapter features a standard AC wall plug and a USB Type-C output to provide 65W PD fast charge power to the separately available Kinefinity Hybrid Dual charger, so you can rapidly charge optional GripBAT batteries.

The adapter provides up to 3A current for a single battery and up to 2A per battery when charging multiple batteries with the separately available dual charger. It can also be used to provide PD fast charging for a professional V-mount battery or other USB Type-C devices.

Add a variety of mounting options to your MAVO Edge with this KineKIT Edge Camera Cage from Kinefinity. The cage is made up of a D-shaped top handle, a top plate, a mini viewfinder bracket for the KineEVF, a top NATO rail, a side plate with rosette, a 15mm baseplate with dual L-series power option, and a bottom adapter plate.

The baseplate can provide a battery backup for your camera using two optional L-series batteries such as the GripBAT 2S. The camera mounts onto a contact plate to draw battery power, allowing you to swap the main camera batteries with uninterrupted power. The bottom plate can be extended with a separately available 19mm rod baseplate using an optional dovetail plate.